ASTM A449 Specification
----------------------------------------------------------
You Are Here -> Home ->Specification ->ASTM A449 Specification
ASTM A449 covers headed bolts, rods, and anchor bolts in diameters ranging from 1/4″ through 3″ inclusive. It is a medium strength bolt manufactured from a medium carbon or alloy steel that develops its mechanical values through a heat treating process. It is intended for general engineering applications.
ASTM A449 is virtually identical in chemistry and strength to ASTM A325 and SAE J429 grade 5. However, A449 is more flexible in the sense that it covers a larger diameter range and is not restricted by a specific configuration.
For quick Quote/Information on A449 Bolts/Studs, please Contact Us
A449 Types
| TYPE 1 | Plain carbon steel, carbon boron steel, alloy steel, or alloy boron steel. |
|---|---|
| TYPE 2 | Withdrawn 2003 |
| TYPE 3 | Weathering steel. |
A449 Mechanical Properties
Size |
Tensile, ksi |
Yield, ksi |
Elong. %, min |
RA %, min |
|---|---|---|---|---|
1/4 - 1 |
120 min |
92 min |
14 |
35 |
1-1/8 - 1-1/2 |
105 min |
81 min |
14 |
35 |
1-5/8 - 3 |
90 min |
58 min |
14 |
35 |
A449 Chemical Properties
Type 1 Bolts |
||||
|---|---|---|---|---|
Element |
Carbon Steel |
Carbon Boron Steel |
Alloy Steel |
Alloy Boron Steel |
Carbon |
0.30 - 0.52% |
0.30 - 0.52% |
0.30 - 0.52% |
0.30 - 0.52% |
Manganese, min |
0.60% |
0.60% |
0.60% |
0.60% |
Phosphorus, max |
0.040% |
0.040% |
0.035% |
0.035% |
Sulfur, max |
0.050% |
0.050% |
0.040% |
0.040% |
Silicon |
0.15-0.30% |
0.10 - 0.30% |
0.15 - 0.35% |
0.15 - 0.35% |
Boron |
0.0005 - 0.003% |
0.0005 - 0.003% |
||
Alloying Elements |
* |
* |
||
| * Steel, as defined by the American Iron and Steel Institute, shall be considered to be alloy when the maximum range given for the content of alloying elements exceeds one of more of the following limits: Manganese, 1.65%, silicon, 0.60%, copper, 0.60%, or in which a definite range or a minimum quantity of any of the following elements is specified or required within the limits of the recognized field of constructional alloy steels: aluminum, chromium up to 3.99%, cobalt, columbium, molybdenum, nickel, titanium, tungsten, vanadium, zirconium or any other alloying elements added to obtain a desired alloying effect. | ||||
Type 3 Bolts, Class * |
||||||
|---|---|---|---|---|---|---|
Element |
A |
B |
C |
D |
E |
F |
Carbon |
0.33 - 0.40% |
0.38 - 0.48% |
0.15 - 0.25% |
0.15 - 0.25% |
0.20 - 0.25% |
0.20 - 0.25% |
Manganese |
0.90 - 1.20% |
0.70 - 0.90% |
0.80 - 1.35% |
0.40 - 1.20% |
0.60 - 1.00% |
0.90 - 1.20% |
Phosphorus |
0.035% max |
0.06 - 0.12% |
0.035% max |
0.035% max |
0.035% |
0.035% |
Sulfur, max |
0.040% |
0.040% |
0.040% |
0.040% |
0.040% |
0.040% |
Silicon |
0.15 - 0.35% |
0.30 - 0.50% |
0.15 - 0.35% |
0.25 - 0.50% |
0.15 - 0.35% |
0.15 - 0.35% |
Copper |
0.25 - 0.45% |
0.20 - 0.40% |
0.20 - 0.50% |
0.30 - 0.50% |
0.30 - 0.60% |
0.20 - 0.40% |
Nickel |
0.25 - 0.45% |
0.50 - 0.80% |
0.25 - 0.50% |
0.50 - 0.80% |
0.30 - 0.60% |
0.20 - 0.40% |
Chromium |
0.45 - 0.65% |
0.50 - 0.75% |
0.30 - 0.50% |
0.50 - 1.00% |
0.60 - 0.90% |
0.45 - 0.65% |
Vanadium |
0.020% min |
|||||
Molybdenum |
0.06% max |
0.10% max |
||||
Titanium |
0.05% max |
|||||
* Selection of a class shall be at the option of the manufacturer |
||||||
A449 Recommended Hardware
Nuts |
Washers |
||
|---|---|---|---|
Plain |
Galvanized |
||
1/4 - 1-1/2 |
1-5/8 - 3 |
1/4 - 3 |
|
A563B Hex |
A563A Heavy Hex |
A563DH Heavy Hex |
F436 |
------------------------------------------------------------------------------------------------------------------------------
For More Information About ASTM A449 Fasteners please call +91 22 2385 6385 / 2385 638 or send an email to info@jfengg.com
